Creating a miniature trash can with a functional lid and DIY trash bags is a delightful project that adds authenticity to any miniaturist's collection. Here's a step-by-step guide to crafting your own mini trash setup:
Materials Needed:
-Our 1:12 Scale Miniature Metal Trash Can
-A Black Trash Bag
-Miniature trash: tiny bits of sand, crumpled paper, or cotton
-Flat iron
-Ruler
-X-Acto blade
-Tweezers
-Small funnel
Steps to Create the Mini Trash Bags:
-
Cut a Strip:
Cut a long strip across the bottom of your trash bag, aligning your ruler about an inch from the bottom seam. -
Trim to Size:
From that long strip, cut sections about 2 inches wide — these will be your individual trash bags.
-
Seal the Sides:
While your flat iron is hot, clamp down and seal both open sides of the strip to form a pouch.
-
Flip Inside Out:
Use tweezers to carefully turn the pouch inside out so the seams are hidden for a realistic look. -
Fill the Bag:
Using a small funnel, fill each bag with sand or your chosen stuffing.
-
Seal the Top:
Twist the top of the bag, then clamp the twisted part between the flat iron plates to seal it shut.
